Genesis ICE Car Audio - Series Three Amplifiers
Our Series 3 amplifiers set the reference by which others are judged, and have won countless awards for their superb sound quality. Each amplifier is carefully handcrafted in our factory located near London.
The ratings in Genesis watts are very conservative, and are comfortably exceeded on the handwritten test certificate showing each amplifiers true performance.
All our Series 3 amplifiers come in a range of Multi-channel, Stereo and Mono versions, perfect to fit any system.
Our Series Three amplifiers:
Compact Four
Dual Mono
Dual Mono Xtreme
Five Channel
Four Channel
Miniblock
Monoblock
Stereo 100
Stereo 60
Compact Four
An ideal system solution where good sound quality in a small package is needed. Inbuilt crossover flexibility allows front and rear or for front and sub systems to be easily implemented.
Specification:
4 x 30W / 2 x 30W + 1 x 120W at 4 ohms
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Simultaneous crossovers |
- |
For complete system flexibility |
Smart Switching |
- |
Automatically routes the signal |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
4 |
Rated Power @ 14.4v [4 Ohm] |
- |
4 x 30 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
4 x 60 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
2 x 120 |
Typical Power @ 14.4v [4 Ohm] |
- |
4 x 55 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
4 x 85 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
2 x 170 |
Maximum Current Draw |
- |
45 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>100dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 300 x 210 |
Weight [Kg] |
- |
4.2 |
Dual Mono
Widely used as a reference point by reviewers, our Dual Mono can trace its lineage back to the very first amplifier we made, the DM200. Extensively redeveloped recently to enhance its sound quality even further, the Dual Mono excels as a front stage amplifier with high quality speaker systems.
Specification:
2 x 100W / 1 x 400W at 4 ohms
[+] Technologies:
Independent level controls |
- |
For perfect channel balance |
Thermal bias tracking |
- |
Eliminates distortion |
Simultaneous crossovers |
- |
For complete system flexibility |
Bespoke terminals |
- |
Our own design optimises signal flow |
Class G efficiency system (DMX/DMA) |
- |
High power in a small body |
Burr Brown Preamp |
- |
For outstanding sound quality |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Dual power supplies |
- |
For outstanding imaging and soundstage |
Independent level controls |
- |
For perfect channel balance |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
2 |
Rated Power @ 14.4v [4 Ohm] |
- |
2 x 100 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
2 x 200 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
1 x 400 |
Typical Power @ 14.4v [4 Ohm] |
- |
2 x 150 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
2 x 250 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
1 x 500 |
Maximum Current Draw |
- |
58 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>100dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 300 x 210 |
Weight [Kg] |
- |
4.1 |
Dual Mono Xtreme
A perfect balance of power, sound quality and efficiency are blended in our Dual Mono Xtreme. Class G circuitry provides high efficiency with the superb sound quality that the Dual Mono is renowned for, with twice the power output.
Specification:
2 x 200W at 4 ohms / 1 x 1000W at 3 ohms bridge load
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Simultaneous crossovers |
- |
For complete system flexibility |
Bespoke terminals |
- |
Our own design optimises signal flow |
Class G efficiency system (DMX/DMA) |
- |
High power in a small body |
Burr Brown Preamp |
- |
For outstanding sound quality |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Dual power supplies |
- |
For outstanding imaging and soundstage |
Independent level controls |
- |
For perfect channel balance |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
2 |
Rated Power @ 14.4v [4 Ohm] |
- |
2 x 200 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
2 x 400 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
1 x 800 |
Typical Power @ 14.4v [4 Ohm] |
- |
2 x 325 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
2 x 480 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
1 x 1000 |
Maximum Current Draw |
- |
110 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>100dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 450 x 210 |
Weight [Kg] |
- |
5.85 |
Five Channel
A complete system solution in one sleek case, our Five Channel can run many different system options due to its superb flexibility. The sub channel has an independent power supply so the front system stays clean even when the sub is working hard. Sub remote included as standard.
Specification:
4 x 50W at 4 ohms + 1 x 200W at 2 ohms
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Dual power supplies |
- |
For outstanding imaging and soundstage |
Simultaneous crossovers |
- |
For complete system flexibility |
Smart Switching |
- |
Automatically routes the signal |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
5 |
Rated Power @ 14.4v [4 Ohm] |
- |
4 x 50 + 1 x 200 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
4 x 70 + 1 x 300 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
2 x 160 + 1 x 300 |
Typical Power @ 14.4v [4 Ohm] |
- |
4 x 55 + 1 x 210 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
4 x 80 + 1 x 310 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
2 x 160 + 1 x 380 |
Maximum Current Draw |
- |
80 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>100dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 450 x 210 |
Weight [Kg] |
- |
5.7 |
Four Channel
Our reference Four Channel features twin power supplies for extra energy reserves, ensuring excellent fidelity at any volume level. Independent and fully flexible filtering allows the Four Channel to suit any system.
Specification:
4 x 75W / 2 x 75W + 1 x 250W at 4 ohms
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Dual power supplies |
- |
For outstanding imaging and soundstage |
Smart Switching |
- |
Automatically routes the signal |
Simultaneous crossovers |
- |
For complete system flexibility |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
4 |
Rated Power @ 14.4v [4 Ohm] |
- |
4 x 50 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
4 x 100 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
2 x 200 |
Typical Power @ 14.4v [4 Ohm] |
- |
4 x 95 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
4 x 85 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
2 x 290 |
Maximum Current Draw |
- |
75 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
> 110dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 360 x 210 |
Weight [Kg] |
- |
4.7 |
Miniblock
Our Miniblock is a scaled down version than the monoblock with around half the power. Featuring the identical technology provides it with the same sound character and transparency as it's big brother.
Specification:
1 x 125W at 4 ohms / 1 x 500W at 1 ohm
[+] Technologies:
Independent level controls |
- |
For perfect channel balance |
Thermal bias tracking |
- |
Eliminates distortion |
Simultaneous crossovers |
- |
For complete system flexibility |
Bespoke terminals |
- |
Our own design optimises signal flow |
Burr Brown Preamp |
- |
For outstanding sound quality |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
1 |
Rated Power @ 14.4v [4 Ohm] |
- |
1 x 125 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
1 x 250 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
[1 Ohm Mono] 1 x 500 |
Typical Power @ 14.4v [4 Ohm] |
- |
1 x 270 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
1 x 440 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
[1 Ohm Mono] 1 x 640 |
Maximum Current Draw |
- |
80 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>110dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 300 x 210 |
Weight [Kg] |
- |
2.5 |
Monoblock
Our Monoblock continues to set the standard for uncoloured and neutral amplification with seemingly limitless authority. Often used for subwoofers due to its unequalled speed and control, it also excels as a front stage amplifier when used in pairs.
Specification:
1 x 250W at 4 ohms / 1 x 1000W at 1 ohm
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Simultaneous crossovers |
- |
For complete system flexibility |
Bespoke terminals |
- |
Our own design optimises signal flow |
Burr Brown Preamp |
- |
For outstanding sound quality |
Custom capable design |
- |
Create your own unique amplifier |
DC Sub level control |
- |
Eliminates noise pickup |
Independent level controls |
- |
For perfect channel balance |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
1 |
Rated Power @ 14.4v [4 Ohm] |
- |
1 x 250 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
1 x 500 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
[1 Ohm Mono] 1 x 1000 |
Typical Power @ 14.4v [4 Ohm] |
- |
1 x 400 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
1 x 720 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
[1 Ohm Mono] 1 x 1200 |
Maximum Current Draw |
- |
170 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>110dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 450 x 210 |
Weight [Kg] |
- |
6.25 |
Stereo 100
This tiny powerhouse provides a great solution where great sound quality is needed in a limited space. Independent high and low pass filters give this amplifier the ability to run front systems or subwoofers as required.
Specification:
2 x 50W / 1 x 200W at 4 ohms
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Custom capable design |
- |
Create your own unique amplifier |
Compact size |
- |
Mounts almost anywhere |
Bespoke terminals |
- |
Our own design optimises signal flow |
Simultaneous crossovers |
- |
For complete system flexibility |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
2 |
Rated Power @ 14.4v [4 Ohm] |
- |
2 x 50 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
2 x 100 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
1 x 200 |
Typical Power @ 14.4v [4 Ohm] |
- |
2 x 55 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
2 x 145 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
1 x 250 |
Maximum Current Draw |
- |
37 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>110dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 200 x 210 |
Weight [Kg] |
- |
2.7 |
Stereo 60
This tiny powerhouse provides a great solution where great sound quality is needed in a limited space. Independent high and low pass filters give this amplifier the ability to run front systems or subwoofers as required.
Specification:
2 x 30W / 1 x 120W at 4 ohms
[+] Technologies:
Thermal bias tracking |
- |
Eliminates distortion |
Custom capable design |
- |
Create your own unique amplifier |
Compact size |
- |
Mounts almost anywhere |
Bespoke terminals |
- |
Our own design optimises signal flow |
Simultaneous crossovers |
- |
For complete system flexibility |
[+] Features:
Power Source [Volts] |
- |
10.8 ~ 14.4 |
Number of Channels |
- |
2 |
Rated Power @ 14.4v [4 Ohm] |
- |
2 x 30 |
Watts RMS @ 0.1% - Rated [2 Ohm] |
- |
2 x 60 |
All Channels Driven - Rated [Bridge 4 Ohm] |
- |
1 x 120 |
Typical Power @ 14.4v [4 Ohm] |
- |
2 x 55 |
Watts RMS @ 0.1% - Typical [2 Ohm] |
- |
2 x 85 |
All Channels Driven - Typical [Bridge 4 Ohm] |
- |
1 x 170 |
Maximum Current Draw |
- |
23 Amps |
Signal to Noise Ratio 'A' Wtd [4 Ohm] |
- |
>100dB |
THD + Noise @ Rated Output |
- |
0.1% |
Input Sensitivity [Volts RMS] |
- |
0.3 ~ 5 |
Frequency Response |
- |
20 Hz ~ 20 KHz |
Dimensions H x W x D [mm]* |
- |
62 x 150 x 210 |
Weight [Kg] |
- |
2.2 |